Noise - aircraft noise from tracked flights
The Noise layer turns aircraft position reports into a sound field drawn over the terrain: a continuous surface with contour lines at the statutory levels, and buildings colored by what they hear. It has no data source of its own. Each set of aircraft comes from a table of position reports read directly, with nothing else drawn, or from a vehicle tracker layer when the aircraft should be drawn and followed live. Either way the rows carry a flight, a timestamp, an altitude and the aircraft type, and the layer stands its receptors on the map's terrain.
Two time regimes
- Live. While the tracker replays, the surface is redrawn every frame from where the aircraft are now, in dB(A) LAmax, with faint rings radiating from each aircraft at the speed of sound. Buildings light up as a jet passes.
- Period. From every fix in the loaded table the layer accumulates the metrics an airport's noise team reports against: LAeq,16h (07:00-23:00), LAeq,8h and Lnight (23:00-07:00), Lden, the number of events above a threshold (N65 by day, N60 at night), and the loudest single event. The period surface shows whenever the replay is paused or the live field is off.
Periods are taken in the viewer's local time.
Setting it up
- Add a Noise layer. Under Aircraft, choose Add aircraft from a data source and pick the table of position reports, then its flight, longitude, latitude, time and altitude columns, and the column holding each aircraft's ICAO type designator (
B738,GLF6,A20N). Set Altitude units to meters or feet, height above sea level as ADS-B reports it. Aircraft read this way are not drawn and have no live field: they feed the period surface. - To draw the aircraft and follow them live instead, add a vehicle tracker layer with Replay on, map its timestamp, altitude and category columns, and choose Add aircraft from a tracker. Rows whose type is not recognized take the class you pick for each set of aircraft; the built-in classes run from piston singles and helicopters through business jets to jumbos.
- Under Buildings and receivers, add the layers to score: each feature receives its level, its loudest event and its event count, and is colored by them.
- Pick the period metric, the threshold and the contour levels. The defaults are the statutory sets: 51 to 69 dB LAeq,16h in 3 dB steps, 55 to 75 dB Lden, N of 10 to 200.
The Last solve section reports the area inside each contour in square kilometers, which is the number a noise envelope or a planning condition is written in.
Before and after
Name the baseline flights under Aircraft and the scenario's flights (a scaled schedule, a changed route, a different fleet) under Compare with a scenario, each from its own table or tracker. The layer then shows A, B or the difference, B minus A, on a diverging scale, with the contour areas for both sides. Bookmarks can switch between them, so a before, an after and a difference page sit in one map. For two plain pages, use one Noise layer per side and a bookmark for each.
What the model is
The engine follows the ECAC Doc 29 segment method: each flight's path is cut into straight segments, each contributes a sound exposure level read from a noise-power-distance curve at its slant distance, corrected for the aircraft's speed, its thrust state (inferred from climb and descent, or fixed) and the lateral attenuation of the ground and the engine installation (SAE AIR 5662). The built-in noise-power-distance set is indicative, assembled from public certification figures; an airport that holds the ANP database can expect its own tables to give different absolute levels.
It is a screening estimate for comparison and communication, not a noise impact assessment. It omits ground operations (taxiing, auxiliary power units, reverse thrust), screening by buildings, reflections and meteorology. The legend and the map's Report info say so.
Look
The surface fades in over the first three decibels above the lowest contour, so the edge reads as sound dying away rather than a hard line. Colors follow the basemap: a luminous ramp on a dark or imagery basemap, a sequential one on a light basemap; both can be set explicitly. Contour lines, the rings and the opacity are switches under Look. The rings are always off for readers who prefer reduced motion.
The layer needs WebGL2. Without it the live field is off and the period surface is solved on the CPU at a third of the grid.
Availability
The Noise layer is part of the Planning pack. It is an Icon Map for Fabric layer; the Power BI visuals do not have it.